Locking The Safe; Selecting A Location - STACK-ON TD14-22-GP-E-S Manual Del Usario

LOCKING THE SAFE

To lock the safe, close the door and rotate the
handle counter clockwise until it stops. If the
handle is not turned until it stops, the locking
mechanism will not lock.
NOTE ON LOCKING THE SAFE: Because
the locking mechanism is deactivated for
approximately 3 to 6 seconds after the
combination is entered, wait a minimum of 6
seconds from the time the combination is entered
to lock the safe.
TURNING THE KEYPAD SOUND OFF/ON
You can turn off the "Beep" sound of the keypad by
entering the code
To turn the "Beep" sound on, enter the code
6 3 3.

SELECTING A LOCATION

The safe must be flat against the floor and
mounted to the floor. For optimal safety and
security, the safe should be installed adjacent to
a side wall with minimal space on either side of
the safe, in an isolated, dry and secure area.
CHILDREN SHOULD NOT PLAY
WITH OR AROUND THE SAFE AT
ANY TIME.
ELECTRICAL OUTLET
The safe has a UL Listed interior electrical outlet
that can be connected to an exterior 110V-15A
power source only.
6 6.
Install the exterior power cord into the electrical
outlet in the back of the safe.
NOTE: For easy access, install the power cord
before securing the safe to the floor.
4
24
40441-1405