GCB-1522
WARNING
A child or adult can tip the cabinet and be killed or
seriously injured.
Failure to secure the cabinet as shown in these
instructions can result in death or serious injury to
children and adults.
Children should not play with or around the
cabinet at any time.
IMPORTANT:
Record the key number and serial number from the back of the cabinet.
Keep keys in a secure place away from children.
Do not store this document in the cabinet
Tools Required:
Hardware included:
Phillips screwdriver
(4) 8-32 x 1/2 bolt
7/16" wrench
(4) 8-32 nut
drill
(4) 1/4 x 1-1/2 lag screw
3/16" drill bit
(4) washers
INSTALLATION OF BARREL RESTS
Installation of Barrel Rests
Measure and mark the locations of the barrel rests on the inner sides
of the cabinet using the dimension shown. (See gure 1)
To install the barrel rests to the cabinet, rst remove the backing from
the foam rests. For help in doing this, pinch the end of the foam to
help secure the adhesive to the foam.
A ach the barrel rests to the inner sides of the cabinet as shown.
Place the bo om pad (A) in the cabinet. (Figure 1)
®
Portable Case
Instructions
Tip Over Hazard
A
Figure 1
SELECTING A LOCATION
e cabinet must be mounted to wall studs and the oor. For
optimal safety and security, the cabinet should be installed adjacent
to the side wall of a closet with minimal space on either side of the
cabinet, in an isolated, dry and secure area.
at against the wall at the back of the unit, as well as at on the oor.
Remove the baseboard if necessary.
THE CABINET SHOULD ALWAYS BE KEPT OUT OF
THE REACH OF CHILDREN.
16"
CENTERS
CABINET
TOP VIEW
MINIMUM
38"
e cabinet should be
1
8
40651-1511