Xerox GBC Fusion Punch II Guia Del Usuario página 79

Error Message
Jam Entrance Sensor
3-8
Possible Cause
1. There is a sheet of
paper blocking the
Entrance Sensor
(first sensor from
the left side of the
machine).
2. The Entrance Sensor
and/or its Reflector
may be dirty.
3. The Side Guide may
be adjusted too tight
for the paper, cover
stock, or tab stock.
Figure 3-4: Punch-Generated Error Messages
Resolution
1. Lift up the Input Track
Ball assembly and remove
the paper.
2. Clean the Entrance Sensor
and reflector, using
Isopropyl alcohol and a
clean, lint-free cloth. If the
problem persists, call your
GBC or Xerox Service
Representative.
3. Ensure that the Side Guide
is not too tight. Perform
the adjustment in Chapter
2 (Setting the Side Guide).
If the problem persists, call
your GBC or Xerox
Service Representative.
4. Press Stop/Reset
button to clear error
message. Follow printer
jam clearance procedure
and resume the job.
Troubleshooting