Treating Your Fracture; Start Treatment - Bioventus EXOGEN Manual Del Usuario

Treating Your Fracture

Start Treatment

Hold EXOGEN in your hand to view the screen, or
set EXOGEN down on a nearby flat surface.
Perform the following steps to begin treatment:
1. Press the button on EXOGEN.
EXOGEN beeps and the start-up screen
appears for 2 seconds.
2. A calendar appears on the screen for 5
seconds. It shows the current month and
your treatment summary. For more
information on the calendar screen, see
"Tracking Your Treatment" on
page 13.
3. Next, the 20-minute countdown timer
appears on the screen. EXOGEN auto-
matically begins the ultrasound treatment.
A treatment symbol flashes as the timer
counts down. This means you are treating
your fracture. (Note: To stop EXOGEN in
the middle of the 20-minute treatment,
press and hold the button until EXOGEN
turns off.) If your EXOGEN has an error
during treatment, see "Troubleshooting"
on page 20.
4. When the countdown timer reaches zero,
EXOGEN beeps and shows the treatment
complete checkmark. The treatment
complete checkmark displays for
5 seconds. Then, the device will
automatically turn off.
Warning: Use of this equipment adjacent to or
stacked with other equipment should be avoided
because it could result in improper operation. If
such use is necessary, this equipment and the
other equipment should be observed to verify
that they are operating normally.
Labeling LBL-000319 [D] RELEASED
Press button
August 2013
S M T W T F S
1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31
® treatment summary
100
%
treatment days = 0
0
total days =
compliance
Calendar
Treatment Complete
Completion
®
www.exogen.com
Start-up screen
Time Remaining
20:00
Treatment countdown
10