First Use; Hour Setting - Bioventus EXOGEN Manual Del Usuario

EXOGEN Setup

First Use

EXOGEN has a calendar which tracks how often the system is used.
The current hour needs to be set to make sure the calendar is accurate.
The hour must be set once, the very first time EXOGEN is turned on.

Hour Setting

1. Press the button once. The hour and AM/
PM show on the screen. This may or may
not be your current hour. The clock must be
set to your current hour. For example, if
your time is anywhere between 2:00 PM
and 2:59 PM, set the hour to 2 PM.
2. Press the button once to advance the time
one hour. Press the button, one press at a
time, until the correct hour and AM/PM is
displayed on the screen.
3. Press and hold button until you see the
hour confirmation screen. This indicates
that the hour has been set on EXOGEN.
You do not need to set the minutes. After
5 seconds the device will automatically
turn off.
Labeling LBL-000319 [D] RELEASED
9
Press button
8
AM
Flashing hour set screen
10
AM
Press &
hold
Current hour
®
www.exogen.com
Start-up screen
9
AM
Press button once to
advance hour
10
AM
Hour Set
Confirmation screen
8
AM
Hour set
10
AM
Press button once to
advance hour
Contact Customer Service at
1-800-836-4080 if you have
incorrectly set the hour and
would like to reset it.
Note: EXOGEN will effectively
deliver treatment even if the
correct hour is not selected.