Target Group For This Manual; Intended Use - Dometic CoolAir SP950C Instrucciones De Montaje

Target group for this manual

3 Target group for this manual
The installation information in this manual is only intended for qualified personnel at
workshops, who are familiar with the guidelines and safety precautions to be applied
during the installation of vehicle accessory parts.
4

Intended use

The fastening frame is used for installing the compressor unit SP950C or SPX1200C
for the parking cooler SP950 or SPX1200, respectively, to the following vehicles:
MAN TGL/TGM/TGS narrow driver cab. The fastening frame is attached on the left
of the rear cab wall.
When fastening the fastening frame, use existing fastening points on the vehicle. You
do not need to drill new holes.
This product is only suitable for the intended purpose and application in accordance
with these instructions.
This manual provides information that is necessary for proper installation and/or
operation of the product. Poor installation and/or improper operating or mainte-
nance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product
resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts
provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.
4
CoolAir SP950C, SPX1200C
EN