Introduction; Characteristics Of The Albatros Rva 47.320; Key Functions; Parameter Setting Level - Sime RVA 47.320 Manual Del Usuario

1

INTRODUCTION

"Albatros RVA 47.320" is realized for use as a single boiler regula-
tor or as a cascade regulator for managing up to 4 boilers.
It is planned to be integrated in a heat-production system with the
following boilers:
– PLANET (all types)
– PLANET DEWY BFT - BFR
– PLANET DEWY 30/50
– DEWY
– MISTRAL 32/XX
– LOGO (all types)
The system utilizes the principle of climate adjustment (based on the
external temperature) for the heating circuit, allowing to control the
production of an external boiler or a combined boiler (D.H.W.).
2

CHARACTERISTICS OF THE ALBATROS RVA 47.320

The operations on the central unit can be carried out after opening
the cover.
2. 1

KEY FUNCTIONS

DESCRIPTION
1 Room temperature set up knob
2 Buttons for setting the value at the selected parameter
3 Parameter selection buttons
4 Display: the values, set-up and state of operation are displayed
a) Symbols – the black bars indicate the state of operation
b) Display during normal control mode or during set-up.
c) Programming line during set-up
d) Heating program of the present day
32
5 Operation mode buttons
– Automatic: Heating is activated according to the set
program.
– Protection functions are active
– Automatic Summer/Winter switching is active
– Heating without a pre-set timing program
– Temperature is adjusted using the knob
– Protection functions are active
– Automatic Summer/Winter switching is not active
– Standby: Heating is OFF
– Temperature is adjusted according to the anti-freeze
protection system
– Protection functions are active
– D.H.W. (sanitary hot water) production
ON (the button is lit): D.H.W. is heated according to the
programmed settings
OFF (the button is dark): the D.H.W. protection remains
active and it prevents the temperature of the accumula-
ting boiler to get lower than a pre-set level
– Manual activation of heating in case of a failure of the
control system: all the pumps are active and the boilers
are at maximum power
6 Function key with manual operation LED
7) PC-connection option for error diagnostic and service
2.2

PARAMETER SETTING LEVEL

The parameters that can be set up are of 3 kinds:
– end user 1 ....................50
– installer 51..................199
– manufacturer (OEM) 1..................199
To enter one of these modes you'll have to follow precise instruc-
tions, which are described below in tables where the exact sequence
of buttons to be pushed is shown.
2.2. 1

User Level

Several set-up options are available to meet the individual require-
ments of the end user: for example, 7-day heating and D.H.W. pro-
gram option; heating curve slope, through which the setpoint for the
zone delivery temperature can be modified; D.H.W. temperature set-
point, Summer/Winter switching temperature.
Please refer to Point 9 for the complete list.
Buttons Explanation
PUSH ONE OF THE "UP/DOWN" SELECTION
1 BUTTONS. THIS WILL LEAD YOU DIRECTLY TO THE
"END USER" PROGRAMMING MODE
PUSH THE SELECTION BUTTONS
2
TO SELECT A LINE
PUSH THE "+/–" BUTTON TO SET UP THE
DESIRED VALUE. THE SET VALUE WILL
3 BE STORED WHEN YOU QUIT THE
PROGRAMMING MODE OR MOVE
ON TO ANOTHER LINE
TO QUIT THE "END USER" PROGRAMMING
4 MODE PUSH ONE OF THE BUTTONS
OF THE WORKING MODE..
Line
1
1......50