Safety Stickers; Identification Of Machine; General Description - Honda HRX426C Manual De Propietario

SAFETY STICKERS

Your lawnmower must be used with care. Therefore, decals have
been placed on the machine, to remind you pictorially of main
precautions to take during use. Their meaning is explained below.
These decals are considered as a part of the lawnmower. Should
one become detached or unreadable, contact your Honda dealer
for its replacement.
We also recommend that you read the safety advice on carefully
(see page 2).
[1]
[2]
[1]
[1] WARNING: Read the owner's manual before using the lawnmower.
[2] Risk of projections: Keep third persons away from the area during use.
[3] Risk of cuts. Rotating cutting means: Do not put hands or feet inside
the cutting-means enclosure. Disconnect the spark plug cap before
performing any operation of maintenance or repairs.
[4] Do not operate without either discharge cover or grass catcher in place.
[5] The muffler becomes very hot during operation and remains hot for a
while after stopping the engine.
[6] The engine emits toxic carbon monoxide. Do not run in an enclosed
area.
[7] Petrol is highly flammable. Stop the engine before refueling.
DESCRIPTION OF THE SYMBOLS USED IN THIS
MANUAL
[8]
[9]
[8] Four wheels models
[9] 1-Speed gear box models
[10] Models equipped with cutting-
means control (Rotostop)

IDENTIFICATION OF MACHINE

[13] Sound power level
[14] CE marking
[15] Nominal power in kilowatt
[16] Recommended engine speed in min
[17] Mass in kilograms (with empty tanks)
[18] Year of manufacture
[19] Serial number
[20] Model - Type
[21] Name and adress of the manufacturer
[4]
[3]
[5]
[7]
[6]
[10] [11]
[11] Rear roller models
[12] Models equipped with cutting-
means brake
-1

GENERAL DESCRIPTION

EQUIPMENT IDENTIFICATION
[12]
CONTROLS
[22] Handle
[23] Cutting-means control lever (*). . .
[24] Lever for adjusting the cutting
height. . . . . . . . . . . . . . . . . . . . . . .
[25] Lever for folding / adjusting the
handle. . . . . . . . . . . . . . . . . . . . . .
[26] Cutting-means control lever
control button (*). . . . . . . . . . . . . . . Activates cutting-means control lever
[27] Drive clutch lever (*). . . . . . . . . . . . Controls the transmission which
[28] Cutting-means brake lever (*). . . . . Stops the cutting means rotation
[29] Throttle lever. . . . . . . . . . . . . . . . .
[30] Fuel tank
[31] Air filter
[32] Spark plug
[33] Engine oil reservoir
[34] Rear roller (*)
[35] Grass catcher . . . . . . . . . . . . . . .
[36] Discharge cover. . . . . . . . . . . . . .
[37] Recoil . . . . . . . . . . . . . . . . . . . . .
[38] Muffler
[39] Fuel valve. . . . . . . . . . . . . . . . . .
(*) For the models equipped
FUNCTIONS
Couple and stops the cutting means
Selects the desired cutting height
Allows you to adjust the height of
the handle or to fold the handle
drives the rear wheels or the rear
roller
and the engine / Authorises start-up
Controls the engine speed
Collects the cut grass
Protects the projections
Allows you to start the engine
Closes / opens the fuel circuit
3 EN