Machine Maintenance - Husqvarna CL400 Manual De Uso Y Mantenimiento

English

Machine maintenance

During long periods of machine downtime it is a good idea to:
•
Clean and lubricate the cutter support (see the section entitled "CLEANING AND MAINTAINING THE CUTTER
SUPPORT")
•
Empty the fuel tank (fig.1 no.1)
•
Lubricate the cylinder with an appropriate lubricant supplied by your reseller
•
Clean the air filter (see the motor's manual)
•
Empty the carburettor bowl of any residual fuel
•
Lubricate any of the machine's painted parts which have been scratched or dented, as well as any of its galvanised
parts.
•
In order to prevent the formation of rust; dry any wet portions of the machine. The use of a pressure washer is
absolutely not recommended.
For any maintenance operations to be performed upon the motor, please follow the indications provided in the motor's
manual, which comes supplied with the machine.
It is generally a good idea to check the level of the motor oil after every 8 hours of use and to clean the air filter after
every 4 hours of use. These operations should be performed more frequently if working in extremely dusty environments.
Never force the machine's motor; if white smoke comes out of the exhaust, slow down.
Specifications – Husqvarna CL400
Motor
Oil capacity
Power
Starting
Trasmission
Clutch
Max speed
Cable laying depth
Width of the wheelbase
Dry weight
Sound pressure
Max Power
Max Noise
Handlebar vibrations
HONDA GCV 160 4 stroke. MAX
0.55 l
4,5 kW.
Self‐winding pull
With belt
Multidis with oil
36 Mt./min
From 1 to 6 cm
25, 27, 29, 31 cm.
49 kg.
LpA 85 dB/A
4.5kw
93 dB/A
X 1.6 m/s2
Aeq Y 2.2 m/s2
Z 4.1 m/s2
22