Cleaning And Maintenance Of The Volcano Hybrid Filling Chamber, The Tube Flexer And The Mouthpiece - STORZ & BICKEL HYBRID Volcano Modo De Empleo

7. O P E R AT I N G T H E V O L C A N O H Y B R I D
Clean the Tube Flexer and the Mouth-
piece regularly together with the Fill-
ing Chamber parts as described in
Chapter 7.8. "Cleaning and Care of the
VOLCANO HYBRID Filling Chamber
with Filling Chamber Cap", page 87.
Disconnect the Tube from the outlet of
the Tube Flexer and the Mouthpiece by
pulling it off. Disconnect the Tube from
the outlet of the Tube Flexer and the
Mouthpiece by pulling it off. Cut off a
new piece of Tubing Section (approx.
1 m) and attach the Tube Flexer and
Mouthpiece.
Caution! Hot surface!
Do not use Tubes shorter than
1 m, otherwise they will not
have sufficient cooling effect
(danger of burning).
7.8. Cleaning and Maintenance of
the VOLCANO HYBRID Filling
Chamber, the Tube Flexer and
the Mouthpiece
Please allow the Filling Chamber, the
Cap and the Tube Kit to cool down be-
fore disassembling them.
The component parts of the Filling
Chamber as well as the Tube Flexer
and the Mouthpiece must be tho-
roughly cleaned on a regular basis to
guarantee proper operation and pure
flavor. For hygienic reasons, it is also
necessary to clean the Filling Cham-
ber with Cap when the device is to be
used by a different person. If a new
Valve Balloon or Tube is used, the Fil-
ling Chamber must also be cleaned
first. Isopropyl alcohol with paper or
cotton cloths or warm water with dish-
washing liquid can be used for manual
cleaning.
Filling Chamber and Cap as well as
the Tube Kit may be easily disassem-
blend and reassembled for cleaning
in a few seconds. (See Chapter 7.8.2.
"Disassembling and Assembling the
Filling Chamber Cap", 7.8.3. "Disas-
sembling the VOLCANO HYBRID Fill-
ing Chamber", 7.8.3. "Assembling the
VOLCANO HYBRID Filling Chamber",
as well as 7.8.5. Disassembling and
Assembling the Tube Kit", starting on
page 89. Filling Chamber and Cap
Components as well as the Tube Flex-
er and the Mouthpiece may also be
cleaned in a dishwasher. However, the
Screens and the Filling Chamber Rings
are too small and could get lost.
Before assembling allow all compo-
nent parts to dry properly.
87