STORZ & BICKEL HYBRID Volcano Modo De Empleo página 80

7. O P E R AT I N G T H E V O L C A N O H Y B R I D
Key command
Press the touch button
'HEAT' for 10 seconds
while the
VOLCANO HYBRID is
switched on
Press the touch button
Temperature Minus and
the 'AIR' control panel
together for approx. 3
seconds.'
Result
Executes the factory reset, which is confirmed by a
sequential run on the LCD. The following properties
are affected:
- Resets the setpoint temperature to 180°C (356°F)
- Sets the booster temperature to 15°C (59°F) above
the setpoint temperature
- Activates the automatic switch off: Runtime 30
min.
- Sets the LCD backlight (brightness) to 80%
- Activation of the acoustic signal when the set
temperature is reached
- Displays cooling down
- Switches on the Bluetooth® module if previously
switched off
Note: the unit displayed so far (°C or °F) is retained
with the factory reset
Activates/deactivates Bluetooth®. This is also
reactivated by a factory reset.
78