Cd Synchronized Recording - Yamaha CDX-497 Manual De Instrucciones

CD SYNCHRONIZED RECORDING

This unit can automatically synchronize a tape deck recording with CD play. With this function, you can record a CD on tape
easily and precisely.
This recording method requires a YAMAHA tape deck compatible with this function. (Refer to the tape deck operation manual
to find out whether it is compatible or not.)
* This unit and the tape deck must be placed close to each other so that both of them can simultaneously receive the signals from the
remote control of this unit.
1
1
3
5
9
DIMMER
1
Press ) ) ) ) ) OPEN/CLOSE to open the disc tray, and
load a disc.
OPEN/CLOSE
2
Load a tape on the tape deck.
* The peak level search function of this unit is useful for
adjusting recording level on the tape deck. (For
details, refer to page 20.)
3
Press SYNCHRO.
This unit enters into the pause mode, and the tape
deck enters into the REC/PAUSE mode.
* In this state, the time display on this unit blinks on and
off.
If necessary, select a desired track by pressing a
numeric button or
or
5
OPEN/CLOSE
2 3 4
6 7 8
0 INDEX
RANDOM
SYNCHRO
/ .
DIMMER RANDOM
REPEAT A–B PROGRAM
3
SYNCHRO TAPE PEAK
SEARCH
3
TIME/INFO
4
Press .
Both CD playback and tape deck recording start.
* CD playback starts shortly after starting the recording.
5
If you want to stop recording temporarily and restart
recording from a desired track, stop this unit by
pressing , and the tape deck as well, then follow
steps 3–4 again.
To cancel synchronized CD-tape recording
function
Press .
Notes
● To finish or stop the recording, make proper operations on the
tape deck. (For details, refer to the owner's manual of the tape
deck.)
● Programmed sequence of tracks can also be recorded with this
function instead of recording an entire disc. (For details, refer
to pages 14–15.)
● This function can also be used together with the automatic
tape-programming function. (For details, refer to pages 16–17.)
CLEAR
SPACE
4
5
21
En