Newborn Inlay; Infant Insert - CYBEX Aton 2 Manual Del Propietário

Newborn Inlay

The Newborn Inlay is a specially designed EPS foam component located in the
bottom of the Infant Carrier underneath the Seat Cover. The Inlay helps to position
smaller babies properly in the Aton 2 during their rst few months. We recommend
using the Newborn Inlay until your child is 11 lb (5 kg) (about 3 months old).
Removing the Newborn Inlay
At the bottom of the seat there is an opening in the seat cover. Simply lift up and
remove the Newborn Inlay from the seat. Keep it for future use.

Infant Insert

To ensure a better t for infants, we recommend using the Aton 2 Infant Insert. The
Insert will give more stability to the head and upper torso, as well as provide a
better Harness t for smaller babies. We recommend using the Infant Insert until
22 lb (10 kg) or until child needs more room. If the Insert pushes baby's head
forward, or compromises the tting of the child to the seat it may be removed.
Folding the Insert
If your child's shoulders are below the rst set of Harness Slots, you may fold the
lower portion of the Infant Insert UNDER your child to boost him/her up for proper
Harness t.
Unfold the Insert when the child's shoulders are at the height of the second set
of Harness Slots.
Removing the Infant Insert
Follow the steps for Adjusting Harness Height on page 14.
NEVER place extra padding under or behind the child. The Infant Insert is the
only approved padding to be used with the Aton 2.
Using the Infant Carrier
Side View
Inlay
15