Center Seating Positions; Using Latch Guides - CYBEX Aton 2 Manual Del Propietário

Center Seating Positions

Check your Vehicle Owner's Manual to see if you can use the Center Seating
Position to install a Child Restraint using LATCH anchors.
DO NOT USE the INNER lower LATCH anchors from the OUTER seating
positions when installing this child restraint in the center seating position
UNLESS the vehicle manufacturer speci cally allows it.
Make sure there is enough height to use the Load Leg in the Center Seating
Position as many vehicles have a hump in the oor that could cause the Base
to be pushed up above the vehicle seat. See page 24.
If using LATCH in the center seating position, ALWAYS check the vehicle
Owner's Manual for correct use of lower LATCH anchors.

Using LATCH Guides

1. Locate the lower LATCH anchors or the symbols indicating their location.
2. If the lower LATCH anchors are hidden behind the crease between
the seat back and seat cushion, install the supplied LATCH Guides to
the lower LATCH anchors for easier installation of the Aton 2 Base.
3. To install, connect the two LATCH Guides to the two
lower LATCH anchors by sliding the LATCH Guides into
the crease and under the lower LATCH anchors.
22
Using LATCH
?