Handle Positions; Using The Designer Canopy - CYBEX Aton 2 Manual Del Propietário

Handle Positions

The Handle has four LOCKED positions:
1. DRIVE and CARRY
2. 1ST LOADING POSITION
3. 2ND LOADING POSITION
4. RESTING
To move handle to a new position, squeeze BOTH Handle Adjustment Buttons
a
(one on each side) while rotating handle
BOTH Adjustment Buttons must be depressed at the same time in order
for the handle to move.
ALWAYS have the handle LOCKED in the DRIVE/CARRY position while
using this child restraint in a vehicle.
ALWAYS verify that the handle is LOCKED in the DRIVE/CARRY position
before lifting Infant Carrier by the handle. An unlocked handle could
move unexpectedly, causing child to fall out.
ALWAYS KEEP your child properly secured in the Harness even when
using the carrier outside of the vehicle.
NEVER HANG toys or other objects from handle when using child
restraint in a vehicle as they could seriously injure a child in a sudden
stop or crash.

Using the Designer Canopy™

Simply pull forward to extend the Aton 2 Canopy. The Canopy has two
positions as shown.
To retract the Canopy, gently push it back into its original position.
Using the Infant Carrier
b .
1 2
a
1
2
3
4
b
13