Replacing The Door Panel - Dometic RML9430 Instrucciones De Uso

RML9430, RML9431, RML9435
➤ Undo the hinge pin (fig. o, page 10) and position it on the other side
(fig. p, page 10).
➤ Turn the door by 180° (fig. q, page 10).
➤ Place the door on the hinge pin.
➤ Tighten the hinge screw at the top door hinge.
➤ Replace the control panel and screw it down tightly.
7.17

Replacing the door panel

A
NOTICE! Beware of damage
Only ever lay the refrigerator on its side and never on its back.
Otherwise the unit may be damaged.
Proceed as follows (fig. r, page 10):
➤ Remove the door trim carefully. It is only stuck on and held by small
hooks (A).
➤ Remove the old panel sideways from the door (A).
➤ Slide the new panel into the opening (B).
➤ Replace the door trim (B).
✓ The door trim is properly fitted once it clicks into place.
If you have laid the refrigerator on its side to insert the panel:
➤ Wait a few minutes before you switch on the refrigerator.
EN
Using the refrigerator
31