Reversing The Door - Dometic RML9430 Instrucciones De Uso

Nevera con extractor
Ocultar thumbs Ver también para RML9430:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Using the refrigerator
Attach the winter covers to both ventilation grilles. To do this, proceed as
follows:
LS330 ventilation grille: fig. f, page 7
LS230 ventilation grille: fig. g, page 8
I
NOTE
You recognise a mounted winter cover on the LS230 ventilation
grille by the bolts protruding from the ventilation grille (fig. g 1,
page 8).
7.15
Replacing the batteries in the igniter (RML9430
only)
Proceed as follows (fig. h, page 9):
➤ Using a screwdriver, press the cap on the battery igniter in 2 or 3 mm and
turn it 90° to the left (A).
➤ Remove the cap (B).
➤ Remove the battery (B).
➤ Insert the new battery (type AA). Make sure the polarity is correct.
➤ Put the cap back on.
7.16

Reversing the door

➤ Remove the control panel.
– RML9430: Unscrew the dials carefully and loosen the screws (fig. i,
page 9).
– RML9431/9435: Open the refrigerator door and undo the screws
underneath the control panel (fig. j, page 9).
➤ Undo the hinge screw on the top door hinge and keep it in a safe place
(fig. k, page 9).
➤ Lift up the door and remove it (fig. l, page 9).
➤ Undo the two screws on the door lock and remove the door lock (fig. m,
page 9).
➤ Place the door lock on the other side again and tighten it with the two
screws (fig. n, page 9).
30
RML9430, RML9431, RML9435
EN
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Rml9431Rml9435

Tabla de contenido