Mondolfo Ferro AS 924 Manual De Uso página 76

• Make sure that the cable is positioned so that no one will trip over it and it cannot
be pulled.
9. Risk of Eye Injury. During the bead insertion and inflation phase,
debris, dust and fluids could be projected into the air. Remove
any debris present in the tread of the tyre and on the tyre surface.
Wear protective goggles with OSHA, CE approval or other certified
devices during all work phases.
10. Always inspect the machine carefully before using it. Missing,
broken, or worn equipment (including warning stickers) must be repaired or replaced
prior to operation.
11. Never leave nuts, bolts, tools or other materials on the machine. They could remain
trapped in moving parts and cause malfunctions or be projected out of the machine.
12. NEVER install or inflate tires that are cut, damaged, rotten or worn. NEVER install a
tire on a cracked, bent, rusted, worm, deformed or damaged rim.
13. If the tyre is damaged during the mounting phase, do not try to complete the mounting
operation. Remove it and take it away from the service area, marking it as damaged.
14. Inflate the tyres slowly, in steps, while checking the pressure, the tyre, the rim and
the bead. NEVER exceed the pressure limits indicated by the manufacturer.
15. The internal parts in this machine could create contacts or sparks if exposed to flam-
mable vapours (petrol, paint thinner, solvents, etc.). Do not install the machine in a
narrow area or below floor level.
16. Do not operate the machine while under the influence of alcohol, medicine or drugs.
If you are taking prescription or non-prescription medicine, contact a physician to
understand the side effects that the medicine could have on the ability to operate
the machine safely.
17. Always use OSHA, EC approved and authorised personal protective equipment (PPE)
or equipment with equivalent certification while operating the machine. Consult your
supervisor for additional instructions.
18. Remove jewellery, watches, loose clothing, ties and restrain long
hair before using machine.
19. Wear protective, non-slip footwear while using the tyre changer.
20. Wear proper back support and employ proper lifting technique when
placing, moving, lifting or removing wheels from the tire changer.
21. This machine may only be used, maintained or repaired by properly
trained employees of your company. Repairs may only be performed
by qualified personnel. The Manufacturer's technical personnel
are the most qualified individuals. Employers must determine if
an employee is qualified to carry out any machine repair safely if
the operator has attempted to make the repair.
22. The operator must pay close attention to the warnings on the
equipment labels before starting the machine.
76
AS 924 - AS 924 A Operator's Manual