8.4. WHEEL CLAMPING
While moving the wheel clamping grippers, keep hands and other parts of the body well
away from moving parts of the machine.
If the weight of the wheel exceeds 10 kg with a lifting frequency exceeding 20
wheels/hour, it is recommended that a lift is used (optional).
- Pull the release button
the manipulator arms in the "resting" position (tool at
the top and horizontal arm fully retracted) (A Fig. 18c).
- Press the button
in the "resting" position.
- Press the pedal
column to the "resting" position (B Fig. 18c).
- If the range of the diameters (10"→20" or 14"→24")
has to be set using the adjustment device below the
turntable, ((1-2-3 Fig. 19), act as follows:
- Press the pedal
fully raised configuration (Fig. 18e).
In this configuration the clamps are fully open.
• With the machine stationary, remove the lock-
ing pin by acting on
the knob (A Fig.19)
while ensuring that
no control is pressed.
• Rotate the adjust-
ment device acting
on the knob until it
affixes in the new
position (A Fig. 19).
AS 924 - AS 924 A Operator's Manual
CAUTION
CAUTION
(Fig.18a) to position
(Fig. 18b) to lock the arms
(Fig.18d) to bring the
and bring it to the
18a
18d
18b
18c
UK
18e
101