To Set The Static Correction Level; Battery Contact Verification; Function And Response Table; Over Correction Protection - Petsafe IF-300 Manual De Adiestramiento Y Funcionamiento

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

To Set the Static Correction Level

Read all steps before attempting to set
the Static Correction Level.
1. Remove the clear plastic cover with the
edge of the Test Light Tool to expose
the Correction Level Button (2D).
2. With the battery installed, press the
Correction Level Button and release
when the Receiver LED Indicator Light
lights up (2E).
3. The Receiver LED Indicator Light will
emit a series of flashes representing
the Static Correction Level.
4. Increase the Static Correction Level by
pressing and releasing the Correction
Level Button within 5 seconds of the
previous series of flashes.
5. After setting the Static Correction Level, replace the cover to protect the Correction Level Button.
The Static Correction levels increase in strength from 1 to 4. Pushing the Correction Level Button
while the Receiver Collar is on level 4 will cause the Receiver Collar to revert to level 1. Refer to the
Function and Response Table to choose the Static Correction level that best fits your pet.
The Receiver Indicator Light acts as a low battery indicator. The light will flash every 4 to 5 seconds
when battery replacement is required.

Battery Contact Verification

Remove Receiver Collar from your pet. Press the button and verify that the LED light illuminates. If
the LED light does not come on remove the battery. Locate the metal tabs in the battery well. Gently
lift the tabs to ensure that the battery will make good contact. Replace the battery into the Receiver
Collar. Press the button and check that the LED light illuminates.
Indicator Light
Response
1 Flash
2 Flashes
3 Flashes
4 Flashes
Flashes once every
4 to 5 seconds

Over Correction Protection

If your pet enters the Boundary Zone or continues anywhere beyond the Pet Area, this feature limits
the Static Correction duration to 30 seconds.
In the unlikely event that your pet leaves the Pet Area, he will not receive a Static Correction upon
return to the Pet Area.
8
2D

Function and Response Table

Static
Correction
Receiver Collar Function
Level
1
No Static Correction, Tone Only
2
Low Static Correction
3
Medium Static Correction
4
High Static Correction
Indicates Low Battery
1-800-732-2677
2E
Temperament of Pet
Initial Training Mode
Timid
Timid or Average
Average or High Energy
Tabla de contenido
loading

Tabla de contenido