To Set The Static Correction Level - Petsafe RF-275-11 Manual De Instrucciones

To Set the Static Correction Level

Read all steps before attempting to set the Static Correction Level.
1. Remove the clear plastic cover with the Test Light
Tool to expose the Correction Level Button (D).
2. With the battery installed, press the Correction
Level Button and release when the Receiver
Indicator Light lights up (E).
3. The Receiver Indicator Light will emit a series of
flashes representing the Static Correction Level.
4. Increase the Static Correction Level by pressing
and releasing the Correction Level Button within
5 seconds of the previous series of flashes.
5. After setting the Static Correction Level, replace
the cover to protect the Correction Level Button.
The Static Correction levels increase in strength
from 1 to 5. Pushing the Correction Level Button
while the Receiver Collar is on level 5 will cause
the Receiver Collar to revert to Level 1. Refer to
the Function and Response Table to choose the
Static Correction level that best fits your pet. The
Receiver Collar will emit a Warning Tone and vibrate
10 1-800-732-2677
D
E