To Set The Static Correction Level - Petsafe In-Ground Cat Fence Manual De Funcionamiento

To set the Static Correction Level

Read all the steps before attempting to set the Correction Level.
1. Place the magnet on the Correction Level Key Ring next to the Magnet Key Dot on
the Receiver Collar. The Receiver Indicator Light will come on.
2. Remove the magnet from the Key Dot. The number of fl ashes indicates the Correction
Level.
3. To increase the Correction Level, place the magnet next to the Magnet Key Dot within
5 seconds of performing the above step. The number of fl ashes indicates the new
Correction Level.
The Correction Levels increase in strength from 1 to 5. Activating the Magnet Key
Dot while the Receiver Collar is on level 5 will cause the
Receiver Collar to revert to level 1. Refer to the Function
and Response Table below to choose the Correction Level
that best fi ts your cat.
The Receiver Collar is equipped to automatically increase
the level of Static Correction the longer your cat remains
in the Static Correction Zone if the collar is set at level 2
or above.
The Receiver Indicator Light also acts as a low battery
indicator, fl ashing every 4 to 5 seconds when battery
replacement is required.
4 www.petsafe.net
(Bottom)
(Top)