Installation - Tecno-gaz TECNO40 Istrucciones Para El Uso

05
The SURGICAL SUCTION UNIT WITH TROLLEY weighs 16/19/20 kg, the special handle is the only means
to raise and move the machine.
Protected by a cellophane bag, placed in a foam polystyrene cover and inserted in a corrugated paper
sealed with adhesive tape.
During the transport shakes and crashes must be avoided.

INSTALLATION:

1. Remove the packaging, make sure that the parts are whole.
2. Insert the handle in the bushes and close trough the two screw with screwdriver.
3. Set the filter and silicon pipes ( to see paragraph 07).
4. Connect supply cables to the network and to the device, set to ON the general switch, verify if the
pump works.
5. We don't supply suction catheters, if necessary, use only catheters according to norm ISO 8836: 1997
WARNING:
The packaging must be kept during the warranty time.
Do not disperse the packaging in the environment, recover the recyclable products and hand the others over
to a company of rubbish disposal.
The packed machines must be kept in dry places and at a temperature between -10°C and +40°C.
When the device is ready to be thrown away, you have to respect the rules for the disposal of special
rubbish in accordance with the current laws of destination countries for special waste disposal and hospital.
DB1F020_rev8.docx
TRANSPORT, PACKAGING, INSTALLATION
5.1
DEMOLITION
21