Kasulik Teave - Atlas Copco LZB 77 A0017-15 Instrucciones Originales Del Producto

LZB 77 A0017-15
Ülevaatus
Mootori parima tööea saavutamiseks tavalistes
töötingimustes tuleb iga 12 kuu või iga 2000 töötunni
järel, ükskõik kumb saabub enne, viia läbi üldine
puhastamine ja hooldus. Raskete töötingimuste korral
tuleb hooldusi viia läbi veelgi sagedamini.
A
Puhastage mootor põhjalikult.
Paigaldage mootor ning kontrollige, et see
pöörleb takistusteta. Valage kaks tilka õli õhu sisselaskesse ning laske mootoril 5-10
sekundit tööle rakendamata seista.
A
Kui suruõhk on väga kuiv võib ilma
määrimata mootorite vabakäigukiirus
suhteliselt pika kasutamisaja järel kergelt
väheneda. Vähenemine võib olla 10-15%.
Võllikoormus
Laagri temperatuuri liigse suurenemise vältimiseks
ei tohi ületada meie müügimaterjalides ja viimasel
lehel toodud suurimaid võllikoormuseid.
Vastuvõetava võllikoormuse leiate te viimasel lehel
olevalt diagrammilt.
Fa
(N)
1000
800
600
400
200
200 400

Kasulik teave

C Logige sisse Atlas Copco veebilehele
www.atlascopco.com
Meie veebilehelt leiate te teavet meie toodete,
tarvikute, tagavaraosade ja avaldatud materjalide
kohta.
Ergonomic guidelines
) Take frequent breaks and change work positions
1
frequently.
) Adapt the workstation area to your needs and the
2
work task.
• Adjust for convenient reach range by
determining where parts or tools should be
located to avoid static motion.
Fr
20 mm
Fa
600 800 1000 1200
© Atlas Copco Industrial Technique AB - 9836 4468 00
ET
• Use workstation equipment such as tables and
chairs appropriate for the work task.
) Avoid work positions above shoulder level or with
3
static holding during assembly operations.
• When working above shoulder level, reduce
the load on the static muscles by reducing the
weight of the tool, using for example torque
arms, hose reels or weight balancers. You can
also reduce the load on the static muscles by
holding the tool close to the body.
• Make sure to take frequent breaks.
• Avoid extreme arm or wrist postures,
particularly for operations requiring a degree
of force.
) Adjust for convenient field of vision by
4
minimizing movement of the eyes and head during
the work task.
) Use the appropriate lighting for the work task.
5
) Select the appropriate tool for the work task.
6
) Use ear protection equipment in noisy
7
environments.
) Use high-quality inserted tools or consumables to
8
minimize exposure to excessive levels of
vibrations.
) Minimize exposure to reaction forces.
9
• When cutting:
A cut-off wheel can get stuck if the wheel is
either bent or if it is not guided properly. Make
sure to use correct flanges for cut-off wheels
and avoid bending the wheel during cut-off
operation.
• When drilling:
The drill might stall when the drill bit breaks
through. Makes sure you use support handles
Fr
if the stall torque is too high. The safety
(N)
standard ISO11148 part 3 recommends to use
something to absorb the reaction torque above
10 Nm for pistol grip tools and 4 Nm for
straight tools.
• When using direct driven screw or nutrunners:
Reaction forces depend on tool setting and joint
characteristics. The ability to bear reaction
forces depends on the operator's strength and
posture. Adapt the torque setting to the
operator's strength and posture and use a torque
arm or reaction bar if the torque is too high.
) Use dust extraction system or mouth protection
1 0
mask in dusty environments.
Päritolumaa
Palun vaadake tootesildil olevat teavet.
Ohutus- ja kasutusjuhised
91