Introduction; Intended Use - Parkside PPS 40 B2 Instrucciones De Funcionamiento Y De Seguridad

IP21S Protection class
Standardised operating
U
voltage.
2
Greatest rated value of the
I
mains current.
1 max
Power input;
Number of phases and
1 ~ 50 Hz alternating current symbol
and rated value of the
frequency.
Open circuit voltage
U
rated value
0
Plasma cutter PPS 40 B2

• Introduction

Congratulations! You have
purchased one of our high-quality
products. Please familiarise yourself
with the product before setup or first use.
Please also read the safety instructions
carefully. This product must be set up or used
only by people who have been trained to
do so.
Keep out of the reach of children!
PLEASE NOTE!
fThe use of the term 'product' or
'device' in the following text refers to the
plasma cutter named in these operating
instructions.
Effective value of the
I
greatest mains current.
1 eff
X % Duty cycle.
Rated value of the cutting
I
current
2
Static frequency
converter-transformer-
commutator
Rated value of the
U
mains voltage
1

• Intended use

The device is intended for compressed-air
plasma cutting of all electrically conductive
metals. Observing the safety instructions
and assembly instructions and operating
information in the instructions for use is also
a component of the intended use.
It is imperative to adhere to the applicable
accident prevention regulations. The device
must not be used:
in insufficiently ventilated rooms,
„
in moist or wet environments,
„
in explosive environments,
„
to defrost pipes,
„
in close proximity to people with cardiac
„
pacemakers and
in close proximity to easily flammable
„
materials.
... / Introduction
GB/MT 77