Product-Dependent Symbols; Symbols On The Product; Special Stickers On The Product; Product Information - Hilti VC 20 Manual De Instrucciones Original

Transport by crane is not permissible.
1.3

Product-dependent symbols

1.3.1

Symbols on the product

The following symbols are used on the product:
Warning: hot surface
Transport by crane is not permissible.
1.4

Special stickers on the product

Applicable to UL vacuum cleaners
WARNING: This unit contains hazardous dust. Emptying and maintenance, including the removal of the dust
bag, may be carried out only by persons familiar with the unit and wearing suitable protective equipment. Do
not switch on until the complete filter system has been installed.
Applicable to UM and UME vacuum cleaners
WARNING: This unit contains hazardous dust. Emptying and maintenance, including the removal of the dust
bag, may be carried out only by well-informed persons wearing suitable protective equipment. Do not switch
on the unit until the complete filter system has been installed and the function of the volume-flow control has
been tested.
1.5

Product information

products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Wet / dry vacuum cleaner
Generation
Serial no.
1.6

Declaration of conformity

We declare, on our sole responsibility, that the product described here complies with the applicable directives
and standards. A copy of the declaration of conformity can be found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany
*2190557*
VC 20-U | VC 20-UL | VC 20-UM | VC 20-UME
VC 40-U | VC 40-UL | VC 40-UM | VC 40-UME
02
2190557 English 17