Sleep Timer; Remote Control Battery Replacement - Dimplex BLF3451 Manual Del Propietário

Operation
the display.
G. Brightness
Changes the brightness of the lights
in the unit.
→ Adjusted by repeatedly pressing
the corresponding button on the
remote.
• Indicated by the second digit on
the Floating Display™ changing to
show: "H" (high), and "L" (low).
H.

Sleep Timer

The Sleep Timer can be set to auto-
matically shut off the fireplace after
a preset time (from 30 minutes to 8
hours).
→ To set the timer press the timer
button on the remote, repeatedly,
until the desired time is displayed.
• The Floating Display
the different times as it is adjusted.
Once the timer has begun, press-
ing the button will display the
time remaining before the unit
turns Off.
!
NOTE: The Sleep Timer can be
cancelled at any time by pressing
the button repeatedly until the
sleep timer displays nothing.
18
will display
TM
Resetting the Temperature
Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the whole
unit off and it will not come back on
without being reset. It can be reset
by turning the power to the unit and
waiting 5 minutes before turning the
unit back on.
CAUTION: If you need to continu-
ously reset the heater, unplug the
unit and call technical support at
1-888-346-7539.
Remote Control Battery
Replacement
To replace the battery:
1. Slide battery cover open on the
remote control.
2. Correctly install one 3 Volt
(CR2032 [longer life] or CR2025)
battery in the battery holder.
3. Close the battery cover.
Battery must be recycled or
disposed of properly. Check
with your Local
Authority or Retailer for recycling
advice in your area
www.dimplex.com