Storage - Gesipa TAURUS 1 AV Manual De Instrucciones Con Lista De Repuestos

Gradually increase the air pressure to mains
pressure at the regulator; any excess hydraulic oil
is squeezed out.
Unscrew oil top-up tank from the riveting tool and
wipe up any escaped hydraulic oil with a cloth.
Screw in oil filler plug (P) and gasket (Q) with
TORX screwdriver T20.
®
Carefully unscrew oil filler plug (P) by approx.
2 turns; the piston unit will slowly move into the
forward end position. Collect any leaking oil with
a cloth
Screw on support sleeve (E) with WAF 14 open-
ended spanner.
Insert compression springs (D) (possible number
of compression springs for triggering force: 0 to 5
springs).
Screw on union nut (A) and steel head sleeve (C).
Regular maintenance will extend the service life of your high-quality GESIPA
and they should be serviced at least every 2 years by an authorised workshop or by
GESIPA Service. We recommend servicing tools that are subject to intensive use
®
ahead of schedule.
9.4

Storage

The blind rivet setting tool should be stored in a dry place where there is no danger of frost.
Unscrew oil filler plug (P) and gasket (Q) with
TORX
screwdriver T20.
®
Screw on the oil top-up tank provided with cover.
Gradually increase the air pressure to mains
pressure at the regulator; any excess hydraulic oil
will be squeezed out.
Unscrew oil top-up tank from the riveting tool and
wipe up any escaped hydraulic oil with a cloth.
Screw in oil filler plug (P) and gasket (Q) with
TORX screwdriver T20.
®
Carefully unscrew oil filler plug (P) by approx.
2 turns; the piston unit will slowly move into the
forward end position. Collect any leaking oil with
a cloth.
Screw on support sleeve (E) with WAF 14 open-
ended spanner.
Insert compression springs (D) (possible number
of compression springs for triggering force: 0 to 5
springs).
Screw on union nut (A) and steel head sleeve (C).
GB
tools
®
25