Overview; Use For Intended Purpose; Safety Information - Gesipa TAURUS 1 AV Manual De Instrucciones Con Lista De Repuestos

GB
1.

Overview

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
2.

Use for intended purpose

As described in these operating instructions, the blind rivet setting tool may only be used for
the purpose of setting blind rivets. Observe the safety information!
3.

Safety information

• The blind rivet setting tool is to be used solely for the purpose of setting blind rivets.
• Never overload the blind rivet setting tool; work within the specified working capacity.
• Do not use tool without material. The blind rivet could be flung from the blind rivet setting tool.
Never turn the blind rivet setting tool towards yourself or towards other people.
• The spent mandrel container must remain mounted on the blind rivet setting tool during operation.
• The spent mandrel container must be emptied in good time; overfilling will cause the blind rivet set-
ting tool to malfunction.
• Never use the blind rivet setting tool as a hammer.
• Regularly check the compressed air lines to ensure they are fitted correctly and airtight.
18
Union nut
Nosepiece
Steel head sleeve
Compression springs
Support sleeve
Chuck housing
Jaws
Jaw pusher
Damping ring
Centre part
Spring
Spent mandrel container
Control slide valve
Trigger
Slide
Oil filler plug
Seal