Tabla de contenido
719 S Titrino
Info.ActualInfo.Display.L2
Lines of the display. The display can be written to from the computer. Pro-
ceed as follows:
Lock the display, see 3.2.2.80.
$Q sends the contents of the corresponding display line.
3.2.2.71. Info.Assembly.CycleTime
Info.Assembly.ExV
Inquiries regarding basic variables of the assembly: Cycle time in s, volume of
the active Exchange Unit in mL.
3.2.2.72. Assembly.Bur.Rates.Forward.Selected
Assembly.Bur.Rates.Forward.Digital
Assembly.Bur.Rates.Reverse.Selected
Assembly.Bur.Rates.Reverse.Digital
Expel and aspirating rate.
Digital or analog control. With digital control, the inputted value applies (in
mL/min). "max." means maximum possible rate with the Exchange Unit in
current use.
Analog means rate control with the analog potentiometer on Titrino.
3.2.2.73. Assembly.Bur.Fill
$G starts the 'FILL' mode of the buret function.
3.2.2.74. Assembly.Bur.ModeDis
Assembly.Bur.ModeDis.Selected
Assembly.Bur.ModeDis.V
Assembly.Bur.ModeDis.Time
Assembly.Bur.ModeDis.VStop
Assembly.Bur.ModeDis.AutoFill
Dispensing mode with parameters. The dispensing mode can only be started
and stopped via the RS Control. During a running dosification, no method can
be started at the Titrino.
.Selected: Dispensing of volume increments or during a preset time.
.Volume, .Time: Size of the volume increments or entry of time.
.VStop:
Limit volume for the dispensing.
.AutoFill:
ON means automatic filling after every dispensing.
3.2.2.75. Assembly.Meas.Status
Assembly.Meas.MeasInput
Assembly.Meas.Ipol
Assembly.Meas.Upol
Measurement in assembly. The measuring function can only be started via RS
Control. When the measuring function is switched on, no method can be
started at the Titrino.
.Input:
Selection of the potentiometric measuring input 1, 2, diff., polar-
ized electrodes or temperature.
3.2 Remote control commands
up to 24 ASCII characters
digital, analog
0...150, max.
digital, analog
0...150, max.
$G, $S, $H, $C
volume, time
0.0001...0.1...9999
0.25...1...86400
0.0001...9999, OFF
1, 2, Diff., Ipol, Upol, Temp
±127...1...+127
±1270...400...+1270
read only
read only
$G, $H, $C
ON, OFF
ON, OFF
89
Tabla de contenido
