Tabla de contenido
E36
E37
E38
E39
E40
E41
E42
E43
E44
E45
719 S Titrino
RS receive errors:
Parity
Exit: <QUIT> and ensure settings of appropriate parameters at
both devices are the same.
Stop Bit
Exit: <QUIT> and ensure settings of appropriate parameters at
both devices are the same.
Overrun error. At least 1 character could not be read.
Exit: <QUIT>
The internal working-off buffer of the Titrino is full (>82
characters).
Exit: <QUIT>
RS send errors:
DSR=OFF No proper handshake for more than 1 s.
Exit: <QUIT> Is the receiver switched on and ready to receive?
DCD=ON No proper handshake for more than 1 s.
Exit: <QUIT> Is the receiver switched on and ready to receive?
CTS=OFF No proper handshake for more than 1 s.
Exit: <QUIT> Is the receiver switched on and ready to receive?
The transmission of the Titrino has been interrupted with XOFF for
at least 6 s.
Exit: Send XON or <QUIT>
The RS interface parameters are no longer the same for both
devices. Reset.
The receive buffer of the Titrino contains an incomplete command
(L
missing). Sending from the Titrino is therefore blocked.
F
Exit: Send L
or <QUIT>.
F
3.1 General rules
61
Tabla de contenido
