Installing And Connecting The Unit - Sirona Dental SIROTorque L+ Manual Del Operador

4 Installing and connecting the unit

4
Installing and connecting the unit
1
5
6
4
3
A
13
s G s G
t e m t e m
S y s S y s
1 1
e 3 e 3
t a l t a l
a ß a ß im im
e n e n s t r s t r s h e s h e
a D a D e n e n
r ik r ik
o n o n F a b F a b 5 B 5 B
S ir S ir y y
6 2 6 2 a n a n
6 4 6 4
r m r m
D - D - G e G e
9
10
7
12
11
8
3
0 V 0 V ) )
(2 3 (2 3
) )
0 V 0 V
M M
- 0 2 - 0 2 (1 2 (1 2
E 2 4 E 2 4
2 M 2 M
T IY T IY 4 - 0 4 - 0
M 2 M 2
T IY T IY
2 3
0 1
5
H H
m b m b
6a
The SIROTorque L
converting the compressed air emitted by a dental
treatment center into electrical energy. A straight/
contra-angle dental handpiece can be powered by this
energy. The electric motor of the SIROTorque L
BL (4) or motor BL ISO (5)) replaces the air drive port (for
highspeed handpieces or air-driven motors) previously
used on the dental treatment center.
It is connected and controlled solely via the hose
coupling (6a) of the air-driven instrument.
Control is effected by means of the pneumatic foot switch
(A) which is available on the unit side. Power is supplied
by an external transformer (12).
Site of installation
Mount the SIROTorque L
location on top of or adjacent to the dentist element of
the treatment center.
Be sure to choose the installation site of the
SIROTorque L
connected to the dentist element with the previously
used highspeed handpiece or air motor hose (6). Ensure
that the unit has a safe and stable stand.
Connection
Detach the highspeed handpiece, quick coupling or air
motor used until now from the supply hose and plug
connection piece (6a) into the four-hole connection (9)
on the rear side of the unit.
ATTENTION
With a 5-hole hose, remove the lamp from the hose prior
to operation.
Fit the electric motor hose (3) to the connection piece (8)
on the rear side of the SIROTorque L
corresponding electric motor to the motor hose (see
Operating Instructions of motor). Place the motor in the
holder on the dentist element which was previously
occupied by the air-driven instrument.
Connect the connector of the transformer connecting
cable (7) to the connection piece (11) of the SIROTorque
+
L .
Plug the power cable (13) into the transformer.
All cables must be safely routed, avoid stumbling
hazards!
Plug the power plug of the corresponding power cable
from the transformer into a grounded (shock-proof)
socket.
Do not use any transformer other than the one
approved and supplied by Sirona (TIYE24-02M;
7
230V)!
Sirona Dental Systems GmbH
Operating Instructions SIROTorque L
+
was developed for the purpose of
+
(1) at an easily accessible
+
so that the SIROTorque L
+
. Attach the
61 74 499 D 3489
D 3489.201.02.02.02
+
+
(motor
+
can easily be