Water Circulation System / Recycling Mode; Sweeping; Brush Contact Pressure Pedal; Checking The Filling Level Of The Waste Container - Kärcher MC 250 Implementos

 Working with recycling water
Recycling water pump switch
1
Save button
2
Rotary knob
3
(1)Switch on the water pump for recycling water via the
switch on the armrest control panel. Press for at least 2
seconds.
(2)Set the amount of water with the rotary knob on the con-
trol console. Confirm by pressing the Save button.

1.5.4 Water circulation system / recycling mode

In recycling operation, the filled water is circulated in the
waste water tank / waste container.
It is conveyed to the suction mouth via a centrifugal pump.
In the suction mouth, this recycling water is immediately
sucked in, cleaned by side filters and returns to the waste
water tank / waste container via the valve.

1.5.5 Sweeping

The operation or the assignment of the control console can
be found in the chapters of the 2-brush sweeping system
or 3-brush sweeping system.

1.5.6 Brush contact pressure pedal

Brush contact pressure pedal
1
Briefly press the pedal: Full brush pressure and in-
creased brush speed for heavy soiling.
Hold the pedal pressed: Suction mouth remains lowered
when reversing, vacuumed substances are also taken up
when reversing.

1.5.7 Checking the filling level of the waste container

Check the filling level of the waste container from time to
time.
 With normal waste, empty the waste container when the
container is almost full, at the latest when the suction
performance decreases and dirt remains.
 In the case of heavy waste, a display can light up that
indicates a full waste container (weight measurement)
even though the waste container is not full.
Waste container cover
1
Handles
2
Climbing aid, foldable
3
1. Lift the waste container until the waste container lid has
opened.
2. Use the climbing aid and handles to check the filling lev-
el.
English 33