Prepare - Petsafe HPA15-13808 Instrucciones De Instalacion Y Uso

Sensitivity Knob: Conveniently placed on the interior frame of the SmartDoor
knob. You can easily adjust the SmartDoor
and environmental factors to optimize SmartDoor
Sensitivity Level: The level of sensitivity can be adjusted by turning the sensitivity knob
from minimum to maximum, depending on radio-frequency interference and the SmartDoor
application and/or location. Pre-set from the factory, the sensitivity level should not be adjusted
until after installation. For example, the sensitivity level may need to be increased if the
SmartDoor is installed in a metal door. Reference page 10 for more information on how to
™
adjust sensitivity.
MODE-RESET Button: Easily select an Operational Mode on your SmartDoor
MODE-RESET button to cycle through selections of operation: LOCKED, UNLOCKED or AUTOMATIC.
Also use the MODE-RESET button to reset your SmartDoor
button 5 times within 5 seconds.
LEARN Button: The LEARN button programs a SmartKey
SmartDoor . (One) SmartKey
™
SmartKeys (each sold separately) to one SmartDoor
™
Operational Modes: The setting options the SmartDoor
are three operational modes:
LOCKED Mode: The SmartDoor
UNLOCKED Mode: The SmartDoor
AUTOMATIC Mode: The SmartDoor
the pet wearing a programmed SmartKey
Iris : A smart home management system from Lowe's
®
broadband internet connection and allows you to control and monitor your SmartDoor
anywhere using your smartphone, tablet or computer. Learn more at www.lowes.com/iris.
LINK/Iris Pairing Mode: Shows when SmartDoor
®
existing or new Iris smart hub. Also indicates during testing if SmartDoor
Iris system.
Battery Compartment: The battery compartment is located on the Interior Frame and requires
(four) D-cell (LR20) batteries. Installation mounting screws, key ring, SmartKey
RFA-67 battery are all located inside the battery box during shipping for your convenience.
RFA-67 Battery: The RFA-67 battery powers the SmartKey
batteries are available at retailers, or by calling PetSafe
petsafe.net. Typical life of the RFA-67 is approximately six months.
Outer Frame Size: Overall pet door dimensions.
Cut-out Size: Size of opening cut in homeowner's door for proper fit and pet door installation.
Replacement Flap Size: Overall flap size when removed from pet door.
Flap Opening Size: Size of usable flap space for pet to enter and exit through the pet door.
Interior Frame: Pet door frame on the inside of home.
Exterior Frame: Pet door frame on the outside of home.

PREPARE

Read this entire guide prior to cutting or modifying an opening in your door or wall. Do not proceed with
cut-out or installation until your SmartDoor
have been completed. Do not remove sensitivity sticker until installation has been completed.
6
's sensitivity, taking into account common interferences
™
comes programmed and ready to use. You may program up to five
™
flap is locked and does not allow entry or exit for any pet.
™
flap is unlocked and allows entry and exit for all pets.
™
flap is electronically locked and allows entry and exit for
™
.
™
NOTICE
is assembled, powered up and all steps under "Prepare"
™
1-800-732-2677
operation.
™
to Iris pairing mode by pressing
™ ®
's unique code to be read by the
™
.
™
can be programmed to operate. There ™
, which connects to your home's
®
is in Iris pairing mode and can LINK to an
™
and is replaceable. Additional RFA-67
™
Customer Care Center or visiting www.
®
is the sensitivity
™
™
by holding the
™
from
™
is communicating to an
™
and the (one)
™
's