Operate; Operating Your Smartdoor; Smartdoor Indicator Light - Petsafe HPA15-13808 Instrucciones De Instalacion Y Uso

OPERATE

Operating Your SmartDoor

LOCKED MODE – Does not allow entry or exit for any pet. The SmartDoor
in LOCKED MODE and when batteries are placed in the SmartDoor
set: hold the MODE-RESET button until the red light illuminates and release when selected.
UNLOCKED MODE – Allows entry and exit for all pets. To set: hold the MODE-RESET button until
the green light illuminates and release when selected.
AUTOMATIC MODE – Allows entry and exit for a pet wearing a programmed SmartKey
to five SmartKeys can be programmed into one SmartDoor
™
automatic mode. To set: hold the MODE-RESET button until the yellow light illuminates and
release when selected.
Note:
If at any time the red light remains illuminated, replace with a set of fresh batteries. If
that does not reset the red light, please call our Customer Care Center for additional help.
SmartDoor Indicator Light
™
Illuminating Color
BLUE
RED
GREEN
YELLOW
RED, GREEN AND YELLOW
14
™
Indicator Light
Condition
Blinks 2 times every 2 seconds
Blinks 3 times then stops
Blinks 2 times every 2 seconds for
40 minutes then stops
Solid only for two seconds after
selecting LOCKED Mode
Blinking
Constant solid
Solid only for two seconds after
selecting UNLOCKED Mode
Blinking
Solid only for two seconds after
selecting AUTOMATIC Mode
Blinking
Blinking at the same time
1-800-732-2677
ships from the factory ™
, it will enter LOCKED MODE. To
™
for selective entry and exit during
™
Pet Door Status
LINK/Iris Pairing Mode or if
®
using "Test" feature on Iris
website, is successfully com-
municating with an Iris system
Pairing with an Iris smart hub
just occurred
Pairing with Iris smart hub
unsuccessful and defaulted to
normal SmartDoor
LOCKED Mode
Low battery alert
Internal failure has occurred
UNLOCKED Mode
Learn Mode
AUTOMATIC Mode
Error alert
Sensitivity Test Mode
; up
™
operation
™