Petsafe HPA15-13808 Instrucciones De Instalacion Y Uso página 3

• Unauthorized changes or modifications may void the user's
authority to operate this equipment, and void the warranty.
• We do not accept any responsibility for openings that are cut
or modified in doors or walls or any damage caused to doors or
walls in forming or modification of such openings, including any
costs associated with the repair or replacement.
• It is recommended to install the SmartDoor
where direct wind is not a factor. The unit only operates
properly while outside temperatures are greater than -5° F
(-20.5° C) and less than 131° F (55° C).
• If homeowner's door or other application is not level, the pet
door must be installed level to swing properly.
• When applying the cutting template, there should be a
minimum of 3" between the bottom and sides of the door
and the outer edge of the template to maintain the structural
integrity of the door.
• Make sure there is nothing underneath the door where you will
be drilling holes or cutting out the opening.
• Use a manual screwdriver to tighten screws. Do not over-
tighten. Over-tightening can strip screws or warp pet door
frame.
www.petsafe.net
in a location
™
3