Components; Tools Needed; How The Smartdoor ™ Works; Key Definitions - Petsafe IRIS Electronic SmartDoor Guía Para El Uso

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Components

Located inside the battery
compartment is the SmartKey
battery, mounting screws and key ring.
Operating Guide
Interior Frame
with Flap
Exterior Frame
Cutting Template

Tools Needed

____________________________________________________________________________________________________________________________________________
How the SmartDoor
Using radio-frequency technology, the SmartDoor
a battery power-driven flap to unlock so your pets can come and go as they please. When the
SmartDoor
no longer senses your pets' SmartKey
The SmartDoor
can detect up to five programmed SmartKeys
modes: fully locked mode and unlocked mode.
Install the SmartDoor
SmartDoor

Conversion Kit

SmartDoor
Conversion Kits are available for wall installation applications. The wall extension
conversion kit frames out exposed areas, giving your door installation a clean, smooth, finished
look. For brick, concrete or block wall construction an additional extension is available for the
large conversion kit. Note: The SmartDoor
the brick and does not require additional tunnel extensions. You may purchase a SmartDoor
Conversion Kit or large extensions through selected online websites, www.petsafe.net or by calling
our Customer Care Center. See "Replacement Parts" on page 12.

Key Definitions

Radio-Frequency Technology – The use of a radio-frequency signal that can be transmitted
without wires.
SmartKey
– A SmartKey
is a battery-operated transmitter that sends a unique code to
the SmartDoor
.
4
1-800-732-2677
, RFA-67
SmartKey
Mounting Screws
(8 pcs. large door)
Key Ring
• Jigsaw or Keyhole Saw
• Electric Drill
" (10 mm) Drill Bit
• Phillips Screwdriver
• 4 D-Cell (LR20)
Batteries (required)
• Level
• Tape
• Pencil
• String
Works
reads a SmartKey
's unique signal and triggers
, the flap automatically locks back into place.
and also operates in two other
Through a Wall with the
Conversion Kit Small is designed to be recessed into
SmartDoor
– The SmartDoor
unique SmartKey
SmartDoor
Flap – The SmartDoor
sun protection.
Antenna - The antenna is located inside the SmartDoor
SmartKey
. The SmartKey
the unique code to be read.
Battery
(PetSafe
®
Radio-frequency Interference – Radio-frequency interference is due to radio-frequency signals
RFA-67)
from other household appliances or common electronic products that negatively affect the ability
of the SmartDoor
can come from a variety of sources. Interference can be minimal, constant or ever changing based
on usage and closeness of other electronic household items during SmartDoor
recommended that household appliances and common electronic products be placed at least two
feet (60 cm) away from the SmartDoor
Sensitivity Knob – Conveniently placed on the interior frame of the SmartDoor
knob. You can easily adjust the SmartDoor
Finishing
and environmental factors to optimize SmartDoor
Plugs
(8 pcs. large
Sensitivity Level – The level of sensitivity can be adjusted by turning the sensitivity knob
6 pcs. small)
from minimum to maximum, depending on radio-frequency interference and the SmartDoor
application and/or location. Pre-set from the factory, the sensitivity level should not be adjusted
until after installation. For example, the sensitivity level may need to be increased if the
SmartDoor
is installed in a metal door. Reference page 10 for more information on how to
adjust sensitivity.
MODE-RESET Button – Easily select an Operational Mode on your SmartDoor
MODE-RESET button to cycle through selections of operation: LOCKED, UNLOCKED or AUTOMATIC.
LEARN Button – The LEARN button programs a SmartKey
SmartDoor
. (One) SmartKey
SmartKeys
(each sold separately) to one SmartDoor
Operational Modes
LOCKED Mode – The SmartDoor
UNLOCKED Mode – The SmartDoor
AUTOMATIC Mode – The SmartDoor
the pet wearing a programmed SmartKey
Battery Compartment – The battery compartment is located on the Interior Frame and requires
(four) D-cell (LR20) batteries. Installation mounting screws, key ring, SmartKey
RFA-67 battery are all located inside the battery box during shipping for your convenience.
RFA-67 Battery – The RFA-67 battery powers the SmartKey
RFA-67 batteries are available at retailers, or by calling PetSafe
www.petsafe.net. Typical life of the RFA-67 is approximately six months.
Outer Frame Size – Overall pet door dimensions
Cut-out Size – Opening cut in homeowner's door for proper fit and pet door installation
Replacement Flap Size – Overall flap size when removed from pet door
Flap Opening Size – Usable flap space for pet to enter and exit through the pet door
Interior Frame – Pet door frame on the inside of home
Exterior Frame – Pet door frame on the outside of home

PREPARE

Preparing Your SmartDoor
DO NOT PROCEED WITH CUT-OUT OR INSTALLATION UNTIL ALL STEPS A-D BELOW
HAVE BEEN COMPLETED. DO NOT REMOVE SENSITIVITY STICKER UNTIL AFTER
INSTALLATION.
is an intelligent receiver using an internal antenna to pick up a
code for selective pet entry and exit.
flap is a weather resistant, plastic flap with UV
must be located within a certain proximity of the antenna in order for
to receive a signal from a SmartKey
. Radio-frequency interference or "noise"
's location.
's sensitivity, taking into account common interferences
operation.
comes programmed and ready to use. You may program up to five
.
flap is locked and does not allow entry or exit for any pet.
flap is unlocked and allows entry and exit for all pets.
flap is electronically locked and allows entry and exit for
.
www.petsafe.net
and receives radio signals from the
's operation. It is
is the sensitivity
's
by holding the
's unique code to be read by the
and the (one)
and is replaceable. Additional
Customer Care Center or visiting
®
5

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Ppa11-10709

Tabla de contenido