Cebora PLASMA PROF 180 HQC Manual De Instrucciones página 70

The following numbered text reflects the numbered boxes on the plate.
1. Sparks generated by cutting can cause explosions or fires.
1.1 Keep flammable materials well away from the cutting area.
1.2 Sparks caused by cutting can cause fires. Keep an extinguisher nearby and ensure that someone is ready to
use it.
1.3 Never cut with closed containers.
2 The plasma arc may cause injuries and burns.
2.1 Turn off the electrical power supply before removing the torch.
2.2 Do not keep material near the cutting pathway.
2.3 Wear a full-body protection.
3. Electric shocks caused by the torch or cable can be fatal. Protect yourself properly against the danger of
electric shocks.
3.1 Wear insulated gloves. Never wear damp or damaged gloves.
3.2 Ensure you are insulated from the workpiece and the ground.
3.3 Disconnect the supply cable plug before working on the machine.
4. Inhaling fumes produced during cutting can be harmful to the health.
4.1 Keep your head away from the fumes.
4.2 Use a forced ventilation system or local exhaust to remove fumes.
4.3 Use a suction fan to remove fumes.
5 Arc rays may injure the eyes and burn the skin. Operators must therefore shield their eyes with lenses with a
protection rating equal to or greater than DIN11 and protect their faces properly.
5.1 Wear a safety helmet and goggles. Use appropriate ear protectors and overalls with the collar buttoned up. Use
helmet masks with filters of the correct grade. Wear a full-body protection.
6 Read the instructions before using the machine or carrying out any operation on it.
7. Do not remove or cover warning labels.
70/128