Switching On And Off; Switching On The Torque Module - Hilti SI­-AT-­A22 Manual De Instrucciones Original

4 Technical data
Weight
Bar code scanner
5 Operation
5.1 Fitting the torque module
WARNING
Electrical hazards! Risk of short circuiting.
▶ Before fitting the torque module, check to ensure that the terminals
on the impact wrench and on the torque module are free from foreign
objects.
WARNING
Risk of injury! Hazard presented by a falling torque module.
▶ Check that the torque module is securely attached to the impact
wrench.
▶ Push the torque module onto the impact wrench from the rear until it is
heard to engage with a click.
5.2 Inserting the battery
WARNING
Electrical hazards! Risk of short circuiting.
▶ Before inserting the battery, check to ensure that the battery terminals
and the contacts on the torque module are free from foreign objects.
WARNING
Risk of injury! Hazard presented by a falling battery.
▶ Check that the battery is securely attached to the torque module.
▶ Push the battery onto the torque module from the rear until it is heard to
engage with a click.

5.3 Switching on and off

5.3.1 Switching on the torque module

Conditions
+ The torque module is switched off. Nothing is shown in the display.
1. Set the forward/reverse switch on the impact wrench to the "forward"
position.
Printed: 10.02.2017 | Doc-Nr: PUB / 5331558 / 000 / 00
0.57 lb
(0.26 kg)
Camera / scanner (imager)
3
4
English 5