Preparation And Checks Before Use; Open The Water Shutoff Valve; Connect The Power - American Standard Advanced Clean 100 Combo Manual Del Usuario

Preparation and Checks Before Use

Deodorizing filter
<Inside the nozzle shutter>
* The figure illustrates an open nozzle shutter.
( ☞ Page 39)
Vacuum breaker
Vacuum breaker
* The vacuum breaker is located in the SpaLet
body. Check the vacuum breaker on a regular
basis.
WARNING
● Only 120 VAC outlets
must be used.
● Do not connect too
PROHIBITED
many cords to a single
electrical outlet.
* Doing so may cause fire.
7 - EN
Dust filter
( ☞ Page 41)
®

Open the Water Shutoff Valve

STEP
1
* If the water shutoff valve is closed, turn it
counterclockwise to open.
* If the open/close knob is difficult to turn, grasp it with
a dry cloth and turn.
Water shutoff
valve
Open/close
knob
STEP
2

Connect the Power

● Insert the power plug
into a 120 VAC outlet.
* Check that the power indicator LED on the power
indicator is green.
If the power indicator is not green, press the
【Power】 button on the remote control.
[CAUTION]
● Wait about 10 seconds before reconnecting the power plug.
Open
Power plug
【 Power 】