Emptying The Tank; Blowing Feature - ProTeam ProGuard 4 Portable Manual Del Propieratio

Power
Head
Figure F
Figure G
CAUTION - Wear a dust mask, such as an N95 or P100 mask, if blowing creates
!
dust which might be inhaled.
CAUTION - To reduce the risk of hearing damage, wear ear protectors when using
!
the Vacuum/Blower for extended time or in a noisy area.
ProTeam
OPERATION
Tank
Latch
Tank
(Continued)

Emptying the Tank

1. To remove the lid to empty contents
of the tank, simply lift the two tank
latches on the side of the Vacuum
and lift the power head up and off
the tank and set to the side
(Figure F).
2. Lay the power head on a clean dry
area while emptying the tank or
changing the filter.
3. Dump the tank contents into the
proper waste disposal container
(Figure G).

Blowing Feature

Your Wet/Dry Vacuum has the capability
to be used as a blower for yard work,
patio cleanup and workshop applications
to blow sawdust and other debris.
NOTE: The blowing port is located
opposite the Vacuum port.
WARNING - Always wear safety
!
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before using
as a blower.
WARNING - To reduce the risk of
!
injury to bystanders, keep them clear
of blowing debris.
11