Installation; Packaging And Unpacking; Installation (Service Technician) - Bartscher IR091M01 Manual De Instalación, Uso Y Mantenimiento

7. PROBLEMS DURING OPERATION
The information below is provided to recognize
and repair any failures that may occur when
operating the appliance.
Problem
The heating plates do not work.
The heating plates remain hot.
The oven heating coils do not
work.
The oven does not reach the
preset temperature.
8.

INSTALLATION

8.1.

Packaging and unpacking

During unloading and
appliance follow the
manufacturer placed directly on the packaging
and in this manual.
To lift and transport the product plan to use a fork
lift or stacker, and pay attention to even weight
distribution to avoid a risk of tilting of the
packaging (avoid excessive incline!).
Cause
The electrical connection is
not correct.
Activation of temperature
limiter.
Damaged energy controller.
Damaged heating plate.
The electrical connection is
not correct.
Activation of temperature
limiter.
Damaged switch.
Damaged operational
thermostat.
when installing the
information from the
Some of the failures can be repaired by the user,
others require thorough specialist knowledge.
Such problems may be solved exclusively by the
qualified personnel.
Check connection of supply cable.
Contact the service company.
Wait until the thermostat in the
heating plates restores normal
operation.
Replace the part.
Contact the service company.
When problem persists
contact the service company.
Check connection of supply cable.
Contact the service company.
Wait for the oven to cool down. Then
reset the thermostat (see special
section).
Replace the part.
Contact the service company.
Replace the part.
Contact the service company.
When using the lifting equipment
pay attention to the mains cable and
discharge pipes and feet position.
11
ENGLISH
Solution
GB