Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
5.3.
Oven switching on and off
A) Start the automatic switch-off to turn on
the electrical connection.
B) Turn switch A to activate the oven heating
coils. The green control light (L) will come
on.
C) Turn the oven temperature controller and
set it between 70°C and 300°C.
When the heating coils are activated, the
white indicator light (W) will come on.
Temperature °C
Time in minutes
GB
Pos 0
5.4.
Guidelines on how to use the appliance
Longer interval in the use of the appliance
When you plan not to use the appliance for the
prolonged time, follow the instructions below:
1. Turn on the automatic switch-off to disconnect
from the mains;
2. Thoroughly clean the appliance and
surrounding areas;
3. Apply the vaseline oil on the stainless steel
surfaces;
4. Perform all maintenance works.
Guidelines on regular use of the appliance
To ensure correct use of the device follow the
guidelines below:
Use only accessories provided by the
manufacturer;
Use the heating plates only for heating pots,
do not heat food products directly on the
plates.
The device and its vicinity should be always
kept clean.
Use containers of diameter not lower than
diameter of the heating plates.
70
100
1' 30"
3'
A
Pos 1
When the oven reaches required tempera-
ture the white indicator light goes off.
D) Turn switch (A) to activate or deactivate
the upper, lower, or both heating coils.
E) To switch the oven off turn the switch (A)
to position 0. Then turn the thermostat
controller (B) to position 0.
130
160
200
4' 30'
6'
8'
B
Pos 0
Pos 1
Use only pots with flat bottom.
Cast iron steak frying pans and other metal
alloys are not suitable for use on the ceramic
cooker as high bottom thickness may cause
dangerous heat concentration on the cooker.
Besides, rough bottom may scratch the
surface and the metal alloy may leave
permanent stains.
Use only food grade cleaning agents.
8
240
270
300
11'
14'
17'
L
Capítulos
Tabla de contenido
