Marinate With A Canister; Marinate With Vacuum Bag; Use Of The Function "Pulse Vacuum - CASO DESIGN FastVac 4004 Manual Del Usaurio

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 92
Check the LED status of "vacuumstrengh" and make sure if it is in "normal" setting.
Close the lid and press down firmly on the front handle
Press the "Canister" button to start vacuuming. To ensure there is no air leaking between
the cover and the canister, use your hand to push down the cover at the beginning of the
vacuuming work. The machine will stop automatically when enough vacuum pressure is
achieved. Take out the hose tube from the canister or bowl immediately first after the job is
completed.

18.6 Marinate with a Canister

Wipe canister cover, canister base and ensure they are clean and dry.
Put the items into the canister and do not fill up too full so that the cover can be in good
contact with the canister bowl rim. Close the cover.
lid and press down firmly on the front handle
Press "marinate" button to start working.
The indicator light has been on during the course. It will release air automatically after
finished vacuum, the device will work for 5 cycles.
When the indicator light crush out, the marinate process is completed. Pull off the hose
accessory from canister port and canister cover.

18.7 Marinate with vacuum bag

Place the bag into the vaccum chamber as if you want to vacuum it and press „Marinate".
If you want to seal the marinated bag press button „Seal" so that the marinated bag will be
sealed.

18.8 Use of the function "pulse vacuum"

Since the pressure of the vacuuming becomes too strong for specific foods and these
could be crushed in the bag, you can adjust the length and strength of the vacuuming
process via the function "pulse vacuum". So you can adjust the vacuum strength to the
consistency of your vacuum food and also seal soft foods (for example berry fruit) without
crushing them.
Due to the time and pressure control, the crushing of delicate foods is prevented. You can
also use this function for the packaging of juicy foods to prevent that fluids are aspirated
and drawn out.
1. Put the foods you want to store into the bag.
.
Insert one end of the hose into
the air intake and another end
of the hose into the center
hole of the canister cover.
Check the LED status of
"vacuumstrength" to confirm
the desired vacuum pressure
"normal" or "gentle" according
to the type of food. Close the
.
44
Tabla de contenido
loading

Este manual también es adecuado para:

1404

Tabla de contenido