Consumer Safety Information - Rock Shox Totem Lyrik Manual Del Usuario

English
roCKsHoX ToTEM & LYriK FEaTurEs
COIL
U-TURN
OR
SOLO AIR
2-STEP AIR
LEFT
AIR VALVE
(2-STEP ONLY)

Totem and Lyrik User Manual
DFR
OR
MISSION CONTROL
MOTION CONTROL IS
RIGHT
REBOUND ADJUSTER
95-4015-010-000, Rev. F
Totem and Lyrik User Manual
CongraTuLaTions!
You have the best in suspension components on your bicycle! This manual contains important information
about the safe operation and maintenance of your fork. To ensure that your RockShox fork performs
properly, we recommend that you have your fork installed by a qualified bicycle mechanic. We also urge
you to follow our recommendations to help make your riding experience more enjoyable and trouble-free.
I M P O R T A N T

CONSUMER SAFETY INFORMATION

1. It is extremely important that your RockShox fork is installed correctly by a qualified
bicycle mechanic. Improperly installed forks are extremely dangerous and can result
in severe and/or fatal injuries.
. The fork on your bicycle is designed for use by a single rider, on mountain trails, and
similar off-road conditions.
. Before riding the bicycle, be sure the brakes are properly installed and adjusted. Use
your brakes carefully and learn your brakes' characteristics by practicing your braking
technique in non-emergency circumstances. Hard braking or improper use of the front
brake can cause you to fall. If the brakes are out of adjustment, improperly installed or
are not used properly, the rider could suffer serious and/or fatal injuries.
4. Your fork may fail in certain circumstances, including, but not limited to, any condition that
causes a loss of oil; collision or other activity bending or breaking the fork's components
or parts; and extended periods of non-use. Fork failure may not be visible. Do not ride the
bicycle if you notice bent or broken fork parts, loss of oil, sounds of excessive topping out,
or other indications of a possible fork failure, such as loss of shock absorbing properties.
Instead, take your bike to a qualified dealer for inspection and repair. In the event of a fork
failure, damage to the bicycle or personal injury may result.
5. Always use genuine RockShox parts. Use of aftermarket replacement parts voids the
warranty and could cause structural failure to the shock. Structural failure could result in
loss of control of the bicycle with possible serious and/or fatal injuries.
6. Use extreme caution not to tilt the bicycle to either side when mounting the bicycle to a carrier by
the fork drop-outs (front wheel removed). The fork legs may suffer structural damage if the bicycle is
tilted while the drop-outs are in the carrier. Make sure the fork is securely fastened down with a quick
release. Make sure the rear wheel is fastened down when using ANY bike carrier that secures the
fork's drop-outs. Not securing the rear can allow the bike's mass to side-load the drop-outs, causing
them to break or crack. If the bicycle tilts or falls out of its carrier, do not ride the bicycle until the fork is
properly examined for possible damage. Return the fork to your dealer for inspection or call RockShox
if there is any question of possible damage (See the International Distributor List). A fork leg or drop-
out failure could result in loss of control of the bicycle with possible serious and/or fatal injuries.
7. Forks designed for use with 'v'-style brakes: only mount cantilever-type brakes to the
existing brake posts. Forks with hangerless style braces are only designed for V-style or
hydraulic cantilever brakes. Do not use any cantilever brake other than those intended
by the brake manufacturer to work with a hangerless brace. Do not route the front brake
cable and/or cable housing through the stem or any other mounts or cable stops. Do not
use a front brake cable leverage device mounted to the brace. Forks designed for use
with disc-style brakes: follow the brake manufacturer's installation instructions for proper
installation and mounting of the brake caliper. For forks using a post style disc brake mount,
ensure that your brake caliper mounting bolts have 9-1 mm of thread engagement and are
torqued to 90 in-lb when installed on the fork. Failure to have proper thread engagment can
damage the brake mounting posts, which can result in severe injury and/or death.
8. Observe all owner's manual instructions for care and service of this product.
ROCKSHOX FORKS DO NOT COME WITH THE REFLECTORS REQUIRED BY FEDERAL LAW
FOR NEW BICYCLES, 16 CFR §1512.16. ADDITIONAL REQUIREMENTS FOR REFLECTORS AND
LIGHTING MAY EXIST AND VARY BY LOCATION. YOUR DEALER SHOULD INSTALL PROPER
REFLECTORS AND LIGHTING SYSTEMS TO MEET ALL APPLICABLE FEDERAL, STATE, AND
LOCAL REQUIREMENTS. ALWAYS USE FRONT AND REAR LIGHTS IN ADDITION TO REFLECTORS
IF RIDING AT NIGHT OR IN REDUCED VISIBILITY.
© SRAM Corporation • 008
English