Cleaning; Washing The Motorcycle - Honda XL200 Manual Del Propietário

Owner´s Manual

CLEANING

Clean your motorcycle regularly to protect the surface
finishes and inspect for damage, wear and oil leakage.
Avoid cleaning products that are not specifically
designed for motorcycle or automobile surfaces. They
may contain harsh detergents or chemical solvents
that could damage the metal, paint, and plastic on
your motorcycle.
If your motorcycle is still warm from recent operation,
give the engine and exhaust system time to cool off.
We recommend avoiding the use of high pressure
water spray (typical in coin-operated car washes).
NOTICE
High pressure water (or air) can damage certain parts
of the motorcycle.

Washing the Motorcycle

1. Rinse the motorcycle thoroughly with cool water to
remove loose dirt.
2. Clean the motorcycle with a sponge or soft cloth
using cool water. Avoid directing water to muffler
outlets and electrical parts.
3. Clean the plastic parts using a cloth or sponge
dampened with a solution of mild detergent and
water. Rub the soiled area gently rinsing it
frequently with fresh water. Take care to keep brake
fluid or chemical solvents off the motorcycle. They
will damage the plastic and painted surfaces.
4. After cleaning, rinse the motorcycle thoroughly with
plenty of clean water. Strong detergent residue can
corrode alloy parts.
5. Dry the motorcycle, start the engine, and let it run
for several minutes.
6. Test the brakes before riding the motorcycle.
Several applications may be necessary to restore
normal braking performance.
7. Lubricate the drive chain immediately after washing
and drying the motorcycle.
Braking efficiency may be temporarily impaired
immediately after washing the motorcycle. Anticipate
longer stopping distance to avoid a possible accident.
67