Adjusting Direction Of Approach - SICK T4000 Compact Instrucciones De Servicio

Operating Instructions
T4000 Compact
6

Adjusting direction of approach

WARNING
8009212/TF93/2010-03-29 © SICK AG • Industrial Safety Systems • Germany • Subject to change without notice
Adjusting direction of approach
Changing the direction of approach is only
allowed to be performed by authorised and
qualified personnel.
When changing, make sure that the cables not
get damaged.
The sensing face of the read head is marked by the
yellow area. It can be changed in five directions.
The centre of the sensing face is also the centre of
the read head.
Unscrew the screws on the mounting bracket
(Fig. 5 ).
Pull the read head from the mounting bracket and
rotate the read head by 90° (Fig. 5
The sensing face now points down.
Rotate the read head by 180° (Fig. 5
Screw the read head back onto the mounting
bracket (Fig. 5 ). Torque 0.6 Nm.
6
Chapter
).
).
145