Festo MPS Manual Del Usuario página 74

Packaging station
7.
8.
9.
10.
74
After the setup cylinder has been advanced
manually, contact pressure can be precisely
adjusted (see photo). It must be assured that the
setup cylinder's pressing element is not above
the tuck flap's folded edge.
At the same time, excessive pressure should not
be applied to the box top. The setup cylinder's
mounting bracket is then retightened.
Now the lock cylinder is adjusted. Loosen the
screws to this end (see photo).
Fold the box top's tuck flap by allowing the lock
cylinder to press gently against the tuck flap in
the advanced position. Retighten the screws.
The setup cylinder is once again in its initial
position. Start adjusting the folding mechanism.
© Festo Didactic 8062973