Tabla de contenido
AMPROBE
8.4.4. "WAVE" mode
Selecting the WAVE mode the screen below will be displayed according to the settings
made as per paragraph 8.1. The screen show the waveform of the voltage.
The symbols used are described in Tab. 1.
For eventual messages displayed see appendix 1 – MESSAGES DISPLAYED.
Following keys are enabled:
ESC:
SAVE:
27.09.00
V1
= 230.2
Vpk1 = 325.5
freq =
Example of screen
to return back to METER mode (see paragraph 8.4.2).
to save in the instrument memory a record of "Smp" type (see
paragraph 9.2) containing the instantaneous values of voltage and
current present on the instrument inputs. This function is disabled
during a recording.
17:35:12
V
V
50.0
Hz
MULTITEST2000
Capítulos
Tabla de contenido
