Tabla de contenido
AMPROBE
7.2.
ENVIRONMENTAL PARAMETER AND LEAKAGE CURRENT: RECORDING
Before starting a recording we recommend that you confirm that the real time values are
correct. Follow the measurement procedure described in paragraph 7.1.
In addition it's essential that the Instrument settings correspond to the accessories is use.
For this we recommend that you check the instrument's setting before executing an AUX
recording.
To this purpose please check the RECORDER CONFIG settings.
MENU:
to enter in the MENU mode and change the instrument settings. It's
not possible to enter the configuration MENU during a recording or an
energy measurement.
START/STOP: to record the selected parameters according to the instrument's
settings (refer to chapter 10).
7.2.1. AUX Basic setting: RECORDER CONFIG
Place the rotary switch in the AUX position, press the MENU key, using the F1/F2 keys
select the RECORDER CONFIG item and press the ENTER Key.
MENU GENERAL
SAFETY TEST MEMORY
ANALYZER MEMORY
RESET
ANALYZER CONFIG
RECORDER CONFIG
CONTRAST
DATE&TIME
LANGUAGE
COUNTRY
↓
↑
MULTITEST2000
Capítulos
Tabla de contenido
